Makita XPH012 Cordless Hammer Driver-Drill Kit Review

Makita XPH012 18V LXT Lithium-Ion Cordless Hammer Driver-Drill Kit

The Makita XPH012 is an interesting newcomer, a cordless hammer drill/driver. The price is very reasonable, the size is small and the drill is lightweight. Is it too good to be true?

First we should make it clear that the Makita XPH012 is a powerful drill for its size. It weights only 4 pounds, including the battery but has plenty of punch. The Makita XPH012 is also a very versatile tool, it can be used as a driver, drill and hammer drill. But it is not as powerful as large mains powered hammer drills.

Like all good drills, the Makita XPH012 has a keyless chunk, belt clip and built-in LED work light. Variable speed with two speed ranges (0-400 & 0-1,500 RPM) makes it suitable for a wide range of drilling, driving and hammer drilling applications.

The light weight makes it easy to use, also for longer periods of time, without getting tired. The compact size is an advantage if you are working in cramped spaces. All in all, it is a versatile and good drill. Also note that the kit includes one 18V Lithium-Ion battery and a fast charger (30 minutes) as well as a hard case. Quite clearly you get very good value for the money.

On the whole, the Makita XPH012 does not have any major shortcomings. But if you are going to do use the hammering action a lot, you may prefer a corded hammer drill.

The Makita XPH012 Hammer Driver-Drill is backed by a 3-year warranty and a 1-year warranty on the battery.

Pros

  • Compact and Lightweight
  • Versatile Hammer Drill/Driver/Drill
  • Very Good Value For the Money

Cons

  • No Major Shortcomings

Makita XPH012 Cordless Hammer Driver-Drill Specifications

Cordless/Corded Cordless
Voltage (Volts) 18
Battery Power Type Lithium-Ion
Batteries Included Yes (One)
Battery Amp Hours 3.0 Ah
Charger Included Yes, 30 minutes fast charger
Max. Capacity – Concrete 1/2 inch
Max. Capacity – Steel 1/2 inch
Max. Capacity – Wood 1-1/2 inch
Maximum Torque 480 ft-lbs.
Speed (RPM) 0 – 400 / 0 – 1,500
Variable Speed Yes
Blows per Minute 0 – 6,000 / 0 – 22,500
Product Weight 3.3 lbs (tool only); 4.0 lbs with battery
Chuck Size 1/2 Inch
Chuck Type Keyless
Built-in Light Yes
Shipping Weight 10.1 pounds



The following is included in the Makita XPH012 Cordless Hammer Driver-Drill Kit

  • Makita XPH012 Cordless Hammer Driver-Drill
  • 18V LXT Lithium-Ion 3.0 Ah Battery (BL1830)
  • 18V Lithium-Ion Rapid Optimum Charger (DC18RC)
  • Hard Case



What the Customers Say about the Makita XPH012 Hammer Driver-Drill Kit
The customers have given the Makita XPH012 Hammer Driver-Drill Kit a very impressive average rating of 4.8 out of 5. In other words, most of the buyers were very satisfied with their new hammer drill. Virtually everyone said that they had got very good value for their money.

Most of the customers said that the Makita XPH01 was a compact and lightweight drill/driver. The battery and the rapid charger were also praised. Very few negative remarks were mentioned, on the whole virtually everyone was happy with their Makita XPH012.

Here are some typical customer comments:

“So far, so good. I can’t speak to longevity yet but this is smaller, lighter and more powerful than my Porter Cable 14.4 volt. It is also shorter from the chuck to the end of the motor so it is great for tight spaces.”

“great drill. replaces my old Ryobi that i had for the last 3 years. the three in one functions are great, and makes this drill very versatile. the LED light is a nice touch to keep the work area well lit. the charger works great, with easy to read charge status – if you just need to drive a couple screws, and dont want to wait for a whole charge, this charger will tell you when the battery can be removed without damage due to under charge. makita also puts on an handy belt clip on most of their drills, including this one.”

“This is EVERYTHING you’d want in a cordless drill. It drills, screws, and hammer-drills. It has a bright work area light. It has a 2 speed gear box. Its Lithium-ion powered for lighter weight and faster charging (30 min.). It is 18v. for tons of power. It came with a case, battery and charger”

“I was looking for a good quality drill that wasn’t really bulky. This drill is definitely good quality. I think I could have found one a little smaller and lighter but it would be more expensive. I am really happy with this one”

Here you can read more Makita XPH012 Hammer Driver-Drill customer reviews.

Makita XPH012 Hammer Driver-Drill Kit Review Summary

The Makita XPH012 Cordless Hammer Driver-Drill Kit offers excellent value for the money. The drill is compact and lightweight but powerful. It is also very versatile, it can be used as a driver, drill or hammer drill. Additionally, the price is very competitive. If you are looking for a versatile cordless drill, then you should certainly have a closer look at the Makita XPH012.

You can buy the Makita XPH012 Hammer Driver-Drill Kit at Amazon.com, taking advantage of Amazon’s low prices and excellent customer service. Click here to go to Amazon.com

Leave a Reply